The RTS – 75 drying unit is designed for drying various raw materials and materials.
The RTS – 75 drying unit is designed for drying various raw materials and materials.
The design of the drying unit allows for drying cohesive and hard-to-dry, mushy, paste-like and loose materials.
It is used as part of a line for processing post-alcohol grain bard into feed flour, where raw materials previously dehydrated in a centrifuge to a moisture content of 55-65% enter a drying unit and are dried to a moisture content of no more than 10%.
Flowing part made of stainless steel.
| Features | Options |
| Heat exchange surface, m2, no more | 75 |
| Steam pressure, MPa (kgf/cm2), no more | 0.5 (5) |
| Steam consumption, kg/h | 1.65 |
| Moisture of the product at the entrance, % | 55 – 65 |
| Evaporated moisture productivity, kg/hour, no more | 450 |
| Moisture of the product at the exit, % no more | 10 |
| Diameter of shaft discs, mm | 1000 |
| Diameter of shaft discs with vanes, mm | 1 170 |
| Frequency of shaft rotation, (rpm) | 0.17(10) |
| Drive power, kW | 15 |
| Synchronous rotation frequency, s-1 (rpm | 16.7 (1000) |
| Installed power, kW, no more | 20.6 |
| Ts2U-250-31,5-12 U3 reducer | |
| Overall dimensions, mm, no more | |
| Length | 6050 |
| Width, no more | 2200 |
| Height: no system | 2250 |
| With ventilation system | 3880 |
| Weight, kg, no more | 9650 |
